Update

config/i3/themes/manhattan/polybar/colors.ini

@@ -0,0 +1,24 @@
+[color]
+
+BACKGROUND = #001A38
+FOREGROUND = #9ebcc8
+ALTBACKGROUND = #002652
+ALTFOREGROUND = #253a42
+ACCENT = #216B90
+
+BLACK = #001A38
+RED = #BF4371
+GREEN = #D6A174
+YELLOW = #015089
+BLUE = #216B90
+MAGENTA = #577396
+CYAN = #BF658F
+WHITE = #9ebcc8
+ALTBLACK = #6e838c
+ALTRED = #BF4371
+ALTGREEN = #D6A174
+ALTYELLOW = #015089
+ALTBLUE = #216B90
+ALTMAGENTA = #577396
+ALTCYAN = #BF658F
+ALTWHITE = #9ebcc8

config/i3/themes/manhattan/polybar/config.ini

@@ -0,0 +1,320 @@
+## Copyright (C) 2020-2023 Aditya Shakya <adi1090x@gmail.com>
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ../../system.ini
+include-file = ./colors.ini
+include-file = ./modules.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/main]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor = ${env:MONITOR:}
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = true
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 38
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0%
+offset-y = 0%
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.BACKGROUND}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.FOREGROUND}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 6
+line-color = ${color.ACCENT}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-top-size = 0
+border-color = ${color.ACCENT}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 2
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 0
+module-margin-right = 0
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = "Iosevka Nerd Font:size=10;3"
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+font-0 = "Iosevka Nerd Font:size=10;3"
+font-1 = "Iosevka Nerd Font:size=12;3"
+font-2 = "Iosevka Nerd Font:size=6;3"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+
+;; Available modules
+;;
+;alsa backlight battery
+;bspwm cpu date
+;filesystem github i3
+;subscriber demo memory
+;menu-apps mpd wired-network
+;wireless-network network pulseaudio
+;name_you_want temperature my-text-label
+;backlight keyboard title workspaces
+;;
+;; User modules
+;checknetwork updates window_switch launcher powermenu sysmenu menu
+;;
+;; Bars
+;cpu_bar memory_bar filesystem_bar mpd_bar 
+;volume backlight battery_bar 
+
+modules-left = date sep mpd
+modules-center = i3
+modules-right = volume sep2 backlight sep2 battery sep2 network
+
+; The separator will be inserted between the output of each module
+separator =
+
+; This value is used to add extra spacing between elements
+; @deprecated: This parameter will be removed in an upcoming version
+spacing = 0
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = i3
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; DEPRECATED! Since 3.3.0 the tray always uses pseudo-transparency
+; Enable pseudo transparency
+; Will automatically be enabled if a fully transparent
+; background color is defined using `tray-background`
+; tray-transparent = false
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${color.ALTBACKGROUND}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+wm-restack = i3
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = true
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up = 
+scroll-down = 
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+;;scroll-up = i3-msg workspace next_on_output
+;;scroll-down = i3-msg workspace prev_on_output
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+;throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+;format-foreground = 
+;format-background = 
+;format-underline =
+;format-overline =
+;format-spacing =
+;format-padding =
+;format-margin =
+;format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+

config/i3/themes/manhattan/polybar/launch.sh

@@ -0,0 +1,42 @@
+#!/usr/bin/env bash
+
+## Copyright (C) 2020-2023 Aditya Shakya <adi1090x@gmail.com>
+
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+CARD="$(light -L | grep 'backlight' | head -n1 | cut -d'/' -f3)"
+INTERFACE="$(ip link | awk '/state UP/ {print $2}' | tr -d :)"
+RFILE="$DIR/.module"
+
+# Fix backlight and network modules
+fix_modules() {
+	if [[ -z "$CARD" ]]; then
+		sed -i -e 's/backlight/bna/g' "$DIR"/config.ini
+	elif [[ "$CARD" != *"intel_"* ]]; then
+		sed -i -e 's/backlight/brightness/g' "$DIR"/config.ini
+	fi
+
+	if [[ "$INTERFACE" == e* ]]; then
+		sed -i -e 's/network/ethernet/g' "$DIR"/config.ini
+	fi
+}
+
+# Launch the bar
+launch_bar() {
+	# Terminate already running bar instances
+	killall -q polybar
+
+	# Wait until the processes have been shut down
+	while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+	# Launch the bar
+	for mon in $(polybar --list-monitors | cut -d":" -f1); do
+		MONITOR=$mon polybar -q main -c "$DIR"/config.ini &
+	done
+}
+
+# Execute functions
+if [[ ! -f "$RFILE" ]]; then
+	fix_modules
+	touch "$RFILE"
+fi	
+launch_bar

config/i3/themes/manhattan/polybar/modules.ini

@@ -0,0 +1,850 @@
+## Copyright (C) 2020-2023 Aditya Shakya <adi1090x@gmail.com>
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/i3]
+type = internal/i3
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; This will split the workspace name on ':'
+; Default: false
+strip-wsnumbers = true
+
+; Sort the workspaces by index instead of the default
+; sorting that groups the workspaces by output
+; Default: false
+index-sort = true
+
+; Create click handler used to focus workspace
+; Default: true
+enable-click = true
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+enable-scroll = true
+
+; Wrap around when reaching the first/last workspace
+; Default: true
+wrapping-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; NOTE: The label needs to match the name of the i3 workspace
+ws-icon-0 = 1;
+ws-icon-1 = 2;
+ws-icon-2 = 3;
+ws-icon-3 = 4;
+ws-icon-4 = 5;
+ws-icon-5 = 6;漣
+ws-icon-6 = 7;
+ws-icon-7 = 8;
+ws-icon-8 = 9;
+ws-icon-9 = 10;ﳴ
+ws-icon-default = 
+; NOTE: You cannot skip icons, e.g. to get a ws-icon-6
+; you must also define a ws-icon-5.
+
+; Available tags:
+;   <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)>
+;   <label-mode> (default)
+format = <label-state><label-mode>
+format-background = ${color.BACKGROUND}
+
+; Available tokens:
+;   %mode%
+; Default: %mode%
+label-mode = [%mode%]
+label-mode-padding = 1
+label-mode-foreground = ${color.YELLOW}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+label-focused = %icon%
+label-focused-foreground = ${color.RED}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+label-unfocused = %icon%
+label-unfocused-foreground = ${color.FOREGROUND}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+label-visible = %icon%
+label-visible-foreground = ${color.CYAN}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+label-urgent = %icon%
+label-urgent-foreground = ${color.GREEN}
+
+; Paddings
+label-focused-padding = 1
+label-unfocused-padding = 1
+label-visible-padding = 1
+label-urgent-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/bspwm]
+type = internal/bspwm
+
+pin-workspaces = true
+inline-mode = false
+
+enable-click = true
+enable-scroll = true
+reverse-scroll = true
+
+fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; Note that the label needs to correspond with the bspwm workspace name
+ws-icon-0 = 1;
+ws-icon-1 = 2;
+ws-icon-2 = 3;
+ws-icon-3 = 4;
+ws-icon-4 = 5;
+ws-icon-5 = 6;
+ws-icon-6 = 7;
+ws-icon-7 = 8;
+ws-icon-default = 
+
+format = <label-state>
+format-font = 2
+
+label-monitor = %name%
+
+; If any values for label-dimmed-N are defined, the workspace/mode
+; colors will get overridden with those values if the monitor is out of focus
+; To only override workspaces in a specific state, use:
+;   label-dimmed-focused
+;   label-dimmed-occupied
+;   label-dimmed-urgent
+;   label-dimmed-empty
+;label-dimmed-foreground = ${color.FOREGROUND}
+;label-dimmed-underline = ${color.YELLOW}
+;label-dimmed-focused-background = ${color.BACKGROUND}
+
+label-focused = %name%
+label-focused-foreground = ${color.RED}
+;label-focused-underline = ${color.RED}
+label-focused-padding = 1
+
+label-occupied = %name%
+label-occupied-foreground = ${color.CYAN}
+;label-occupied-underline = ${color.CYAN}
+label-occupied-padding = 1
+
+label-urgent = %name%
+label-urgent-foreground = ${color.GREEN}
+;label-urgent-underline = ${color.GREEN}
+label-urgent-padding = 1
+
+label-empty = %name%
+label-empty-foreground = ${color.FOREGROUND}
+label-empty-padding = 1
+
+; Separator in between workspaces
+label-separator = ""
+label-separator-padding = 0
+label-separator-foreground = ${color.ALTBACKGROUND}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mod]
+type = internal/bspwm
+
+format = [<label-mode>]
+format-background = ${color.BACKGROUND}
+format-foreground = ${color.YELLOW}
+;format-underline = ${color.BACKGROUND}
+;format-overline = ${color.BACKGROUND}
+format-padding = 1
+
+label-monocle = "Monocle"
+label-tiled = "Tiled"
+
+label-floating = ", Float"
+label-pseudotiled = ", Pseudo"
+label-fullscreen = ", Full"
+
+label-locked = " | Locked"
+label-sticky = " | Sticky"
+label-private = " | Private"
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/volume]
+type = internal/pulseaudio
+
+; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
+; If not, uses default sink
+sink = 
+
+; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
+; Default: true
+use-ui-max = false
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+format-muted-prefix = 婢
+format-muted-prefix-foreground = ${color.ALTFOREGROUND}
+format-muted-font = 2
+label-muted = " Mute"
+label-muted-foreground = ${color.ALTFOREGROUND}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 奄
+ramp-volume-1 = 奔
+ramp-volume-2 = 奔
+ramp-volume-3 = 墳
+ramp-volume-4 = 墳
+ramp-volume-foreground = ${color.YELLOW}
+ramp-volume-font = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/bna]
+type = custom/text
+
+content = " NA"
+content-prefix = 
+content-prefix-font = 2
+content-prefix-foreground = ${color.RED}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/backlight]
+type = internal/xbacklight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+card = intel_backlight
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <label>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+ramp-5 = 
+ramp-6 = 
+ramp-7 = 
+ramp-8 = 
+ramp-9 = 
+ramp-font = 2
+ramp-foreground = ${color.CYAN}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/brightness]
+type = internal/backlight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+card = ${system.sys_graphics_card}
+
+enable-scroll = true
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <label>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+ramp-5 = 
+ramp-6 = 
+ramp-7 = 
+ramp-8 = 
+ramp-9 = 
+ramp-font = 2
+ramp-foreground = ${color.CYAN}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = ${system.sys_battery}
+adapter = ${system.sys_adapter}
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <animation-charging> <label-charging>
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <ramp-capacity> <label-discharging>
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;format-full = <ramp-capacity> <label-full>
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+
+label-charging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+format-full = <label-full>
+format-full-font = 2
+format-full-prefix = " "
+format-full-prefix-foreground = ${color.GREEN}
+label-full = %percentage%%
+
+; Only applies if <ramp-capacity> is used
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-3 = 
+ramp-capacity-4 = 
+ramp-capacity-foreground = ${color.BLUE}
+ramp-capacity-font = 2
+; Only applies if <bar-capacity> is used
+;bar-capacity-width = 10
+
+; Only applies if <animation-charging> is used
+animation-charging-0 = 
+animation-charging-1 = 
+animation-charging-2 = 
+animation-charging-3 = 
+animation-charging-4 = 
+animation-charging-foreground = ${color.GREEN}
+animation-charging-font = 2
+; Framerate in milliseconds
+animation-charging-framerate = 750
+
+; Only applies if <animation-discharging> is used
+;;animation-discharging-0 = 
+;;animation-discharging-1 = 
+;;animation-discharging-2 = 
+;;animation-discharging-3 = 
+;;animation-discharging-4 = 
+;;animation-discharging-5 = 
+;;animation-discharging-6 = 
+;;animation-discharging-7 = 
+;;animation-discharging-8 = 
+
+; Framerate in milliseconds
+;animation-discharging-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/date]
+type = internal/date
+
+; Seconds to sleep between updates
+interval = 1.0
+
+; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+;;date = %Y-%m-%d%
+
+; Optional time format
+time = %I:%M %p
+
+; if `date-alt` or `time-alt` is defined, clicking
+; the module will toggle between formats
+;;date-alt = %A, %d %B %Y
+#time-alt = %d/%m/%Y%
+time-alt = %b %d, %G
+
+; Available tags:
+;   <label> (default)
+
+format = <label>
+format-prefix = " "
+format-font = 2
+format-prefix-foreground = ${color.CYAN}
+format-padding = 0
+
+; Available tokens:
+;   %date%
+;   %time%
+; Default: %date%
+label = %time%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 2
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online-prefix = " "
+format-online-prefix-font = 2
+format-online-prefix-foreground = ${color.MAGENTA}
+;format-online = <label-song> <toggle>
+format-online = <label-song> <icon-prev> <toggle> <icon-next>
+;format-online-font = 2
+
+format-playing = ${self.format-online}
+format-paused = <label-song> <toggle>
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+;format-offline = <label-offline>
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  "%title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+;;abel-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = "MPD is offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-play-font = 2
+icon-play-foreground = ${color.GREEN}
+icon-pause = 
+icon-pause-font = 2
+icon-pause-foreground = ${color.YELLOW}
+icon-stop = 
+icon-stop-foreground = ${color.RED}
+icon-prev = 玲
+icon-prev-font = 2
+icon-prev-foreground = ${color.CYAN}
+icon-next = 怜
+icon-next-font = 2
+icon-next-foreground = ${color.CYAN}
+icon-seekb = ⏪
+icon-seekf = ⏩
+icon-random = 🔀
+icon-repeat = 🔁
+icon-repeatone = 🔂
+icon-single = 🔂
+icon-consume = ✀
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+;;toggle-on-foreground = #ff
+;;toggle-off-foreground = #55
+
+; Only applies if <bar-progress> is used
+;;bar-progress-width = 45
+;;bar-progress-indicator = |
+;;bar-progress-fill = ─
+;;bar-progress-empty = ─
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; If you use both a wired and a wireless network, Add both modules in config.ini
+[module/ethernet]
+type = internal/network
+interface = ${system.sys_network_interface}
+
+interval = 1.0
+accumulate-stats = true
+unknown-as-up = true
+
+format-connected = <label-connected>
+format-connected-prefix = "歷 "
+format-connected-prefix-foreground = ${color.MAGENTA}
+format-connected-prefix-font = 2
+format-connected-background = ${color.BACKGROUND}
+
+format-disconnected = <label-disconnected>
+format-disconnected-prefix = "轢 "
+format-disconnected-prefix-font = 2
+format-disconnected-prefix-foreground = ${color.ALTFOREGROUND}
+format-disconnected-background = ${color.BACKGROUND}
+
+label-connected = "%{A1:~/.config/i3/scripts/network_menu &:}%downspeed% | %upspeed%%{A}"
+label-disconnected = "%{A1:~/.config/i3/scripts/network_menu &:}Offline%{A}"
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; Normal Module
+[module/network]
+type = internal/network
+interface = ${system.sys_network_interface}
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1.0
+
+; Test connectivity every Nth update
+; A value of 0 disables the feature
+; NOTE: Experimental (needs more testing)
+; Default: 0
+;ping-interval = 3
+
+; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
+; Minimum output width of upload/download rate
+; Default: 3
+;;udspeed-minwidth = 5
+
+; Accumulate values from all interfaces
+; when querying for up/downspeed rate
+; Default: false
+accumulate-stats = true
+
+; Consider an `UNKNOWN` interface state as up.
+; Some devices have an unknown state, even when they're running
+; Default: false
+unknown-as-up = true
+
+; Available tags:
+;   <label-connected> (default)
+;   <ramp-signal>
+format-connected = <ramp-signal> <label-connected>
+
+; Available tags:
+;   <label-disconnected> (default)
+
+format-disconnected-prefix = "睊 "
+format-disconnected-font = 2
+format-disconnected-prefix-foreground = ${color.ALTFOREGROUND}
+format-disconnected = <label-disconnected>
+
+; Available tags:
+;   <label-connected> (default)
+;   <label-packetloss>
+;   <animation-packetloss>
+;;format-packetloss = <animation-packetloss> <label-connected>
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: %ifname% %local_ip%
+;label-connected = "%essid% %downspeed:8% %upspeed:8%"
+label-connected = "%{A1:~/.config/i3/scripts/network_menu &:}%essid%%{A}"
+;;label-connected-foreground = #eefafafa
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+; Default: (none)
+label-disconnected = "%{A1:~/.config/i3/scripts/network_menu &:}Offline%{A}"
+label-disconnected-foreground = ${color.ALTFOREGROUND}
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: (none)
+;label-packetloss = %essid%
+;label-packetloss-foreground = #eefafafa
+
+; Only applies if <ramp-signal> is used
+ramp-signal-0 = 直
+ramp-signal-1 = 直
+ramp-signal-2 = 直
+ramp-signal-3 = 直
+ramp-signal-4 = 直
+ramp-signal-foreground = ${color.MAGENTA}
+ramp-signal-font = 2
+
+; Only applies if <animation-packetloss> is used
+;;animation-packetloss-0 = ⚠
+;;animation-packetloss-0-foreground = #ffa64c
+;;animation-packetloss-1 = ⚠
+;;animation-packetloss-1-foreground = #000000
+; Framerate in milliseconds
+;;animation-packetloss-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/workspaces]
+type = internal/xworkspaces
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; Create click handler used to focus desktop
+; Default: true
+enable-click = true
+
+; Create scroll handlers used to cycle desktops
+; Default: true
+enable-scroll = true
+
+; icon-[0-9]+ = <desktop-name>;<icon>
+; NOTE: The desktop name needs to match the name configured by the WM
+; You can get a list of the defined desktops using:
+; $ xprop -root _NET_DESKTOP_NAMES
+icon-0 = 1;ﱡ
+icon-1 = 2;ﱡ
+icon-2 = 3;ﱡ
+icon-3 = 4;ﱡ
+icon-4 = 5;ﱡ
+icon-default = ﱡ
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
+; Default: <label-state>
+format = <label-state>
+format-padding = 0
+format-font = 2
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-monitor = %name%
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-active = ﱢ
+label-active-foreground = ${color.RED}
+label-active-background = ${color.BACKGROUND}
+;;label-active-underline = ${color.RED}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-occupied = ﱢ
+label-occupied-foreground = ${color.CYAN}
+label-occupied-background = ${color.BACKGROUND}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-urgent = ﱢ
+label-urgent-foreground = ${color.GREEN}
+label-urgent-background = ${color.BACKGROUND}
+;;label-urgent-underline = ${color.red}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-empty = %icon%
+label-empty-foreground = ${color.CYAN}
+
+label-active-padding = 1
+label-urgent-padding = 1
+label-occupied-padding = 1
+label-empty-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/menu]
+type = custom/text
+
+content = 
+content-font = 2
+content-foreground = ${color.ACCENT}
+content-padding = 0
+
+click-left = ~/.config/i3/scripts/rofi_launcher
+click-right = ~/.config/i3/scripts/rofi_runner
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sysmenu]
+type = custom/text
+
+content = 
+content-font = 2
+content-foreground = ${color.RED}
+content-padding = 0
+
+click-left = ~/.config/i3/scripts/rofi_powermenu
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sep]
+type = custom/text
+content = 
+content-font = 3
+
+content-foreground = ${color.FOREGROUND}
+content-background = ${color.BACKGROUND}
+content-padding = 3
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sep2]
+type = custom/text
+content = 
+content-font = 3
+
+content-foreground = ${color.BACKGROUND}
+content-background = ${color.BACKGROUND}
+content-padding = 2
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_